Gw-instek GDS-3000 Series GUG-001, GPIB to USB adapter User Manuel d'utilisateur

GPIB to USB Adapter GUG-001 USER MANUAL GW INSTEK PART NO. 82UG-00100M01 ISO-9001 CERTIFIED MANUFACTURER

GUG-001 User Manual 3. Press USB Device Port from the side menu and choose Computer. 4. Press GPIB from the side menu. 5. Use the variab

OPERATION Function Check To check that the GPIB connection is working, National Instruments Measurement & Automation Explorer (MAX) can be use

GUG-001 User Manual 3. From the Configuration panel access; My System>Devices and Interfaces>GPIB0(GPIB-USB-B) 4. Press the Scan for In

OPERATION 9. The String Received text box will display the query return: GW, GDS-3XXX,PXXXXXX,V1.XX (manufacturer, model, serial number, version)

GUG-001 User Manual APENDIX GUG-001Specifications USB Specification USB Device USB 2.0 full speed device interface GPIB Specification The GPI

APENDIX 15 Miscellaneous Current Consumption Less than 0.5 ADC from 5V Operating Environment Ambient temperature: 0 ~ 50°C Relative humidity: ≤

This manual contains proprietary information, which is protected by copyright. All rights are reserved. No part of this manual may be photocopied,

SAFETY INSTRUCTIONS Table of Contents SAFETY INSTRUCTIONS... 4Safety Symbols ...

GUG-001 User Manual SAFETY INSTRUCTIONS This chapter contains important safety instructions that should be followed when using the GPIB to USB ada

SAFETY INSTRUCTIONS Safety Guidelines General Guideline CAUTION  Do not use the adapter in a damp environment or where there is risk of explosio

GUG-001 User Manual (Pollution Degree) EN 61010-1:2001 specifies pollution degrees and their requirements as follows. The instrument falls under

GETTING STARTED GETTING STARTED The Getting Started chapter introduces the features, functions and appearance of the GUG-001 GPIB to USB adapter. M

GUG-001 User Manual Instrument Overview GUG-001 GPIB Port 24 pin female GPIB port. USB Type A Receptacle USB type A receptacle connects to the

OPERATION OPERATION GDS-3000 Set Up Procedure 1. Connect a GPIB cable from a GPIB controller to the GPIB port on the adapter. 2. Connect the U