OPERATION
OPERATION
GDS-3000 Set Up
Procedure
1. Connect a GPIB cable from a GPIB
controller to the GPIB port on the
adapter.
2. Connect the USB cable from the
rear panel device port (type B
receptacle) on the oscilloscope to
the USB port (type A receptacle)
on the GPIB to USB adapter.
→
3. The Ready Indicator should be lit after the USB
cable is connected.
Configure GPIB
1. Press the Utility key on the GDS-
3000 front panel.
2. Press I/O from the bottom menu.
9
Commentaires sur ces manuels