Gw-instek GDS-2000 series Programming manual Manuel d'utilisateur télécharger pdf (Page 56)

GDS-2000 Series Programming Manual

:MEASure:LRFDelay? (query only)

Return the time value that difference time between the first rising edge of source1

signal and the last falling edge of source2 signal.

Syntax

:MEASure:LRFDelay?

Returns

<NR3>

Note: Please select these two specific measured sources before implement the delay time

measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”

:MEASure:LRRDelay? (query only)

Return the time value that difference time between the first rising edge of source1

signal and the last rising edge of source2 signal.

Syntax

:MEASure:LRRDelay?

Returns

<NR3>

Note: Please select these two specific measured sources before implement the delay time

measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”

:MEASure:NWIDth? (query only)

Return the value of timing measurement of the first negative pulse in the waveform.

Syntax

:MEASure:NWIDth?

Returns

<NR3>.

Note: Please select the specific channel before implement any measurement. See

explanation for “:MEASure:SOURce”

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 92 93

Pas de commentaire

Gw-instek GDS-2000 series Programming manual Manuel d'utilisateur Page 56