Gw-instek PSU-Series Programming User Manual Manuel d'utilisateur télécharger pdf (Page 89)

REMOTE CONTROL

External resistance control; 10kΩ = Io min,

0kΩ = Io max.

:SYSTem:CONFigure:VOLTage:CONTrol

Set

Query

Description

Sets or queries the CV control mode (local control

(panel), external voltage control, external

resistance control). This setting is applied only

after the unit is reset.

Syntax

Query Syntax

:SYSTem:CONFigure:VOLTage:CONTrol { <NR1> }

:SYSTem:CONFigure:VOLTage:CONTrol?

Parameter/Return

<NR1>

Description

Local (Panel) control

External voltage control

External resistance control; 10kΩ = Io max,

0kΩ = Io min.

External resistance control; 10kΩ = Io min,

0kΩ = Io max.

:SYSTem:CONFigure:OUTPut:PON[:STATe]

Set

Query

Description

Sets the output state at power-on. This is the

equivalent to the F-92 (Output Status when Power

ON) power on configuration settings.

Syntax

Return Syntax

:SYSTem:CONFigure:OUTPut:PON[:STATe]

{<NR1>|SAFE|FORCe |AUTO}

:SYSTem:CONFigure:OUTPut:PON[:STATe]?

Parameter

SAFE | 0

The PSU turns on in the same state the unit

was in prior to the previous shut down. The

output is set to off (default).

FORCe | 1

The PSU turns on in the same state the unit

was in prior to the previous shut down. The

output is set to on.

AUTO | 2

The PSU turns on in the same state the unit

was in prior to the previous shut down, but

with the same output on/off setting.

Return parameter

The power on output setting is “SAFE”.

The power on output setting is “FORCe”.

The power on output setting is “AUTO”.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 127 128

Commentaires sur ces manuels

Pas de commentaire

Gw-instek PSU-Series Programming User Manual Manuel d'utilisateur Page 89

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Gw-instek PSU-Series Programming User Manual