Gw-instek AFG-2225 User Manual Manuel d'utilisateur télécharger pdf (Page 283)

REMOTE INTERFACE

283

-222 Data out of range;marker confined to sweep span; value clipped

to ...

Example: The marker frequency is set to a value

outside the start or stop frequencies. The marker

frequency is automatically adjusted to either the

start or stop frequency (whichever is closer to the set

value).

-222 Data out of range;FM deviation; value clipped to ...

Example: The frequency deviation is outside of

range. The deviation is automatically adjusted to an

upper or lower limit, depending on the frequency.

-222 Data out of range;trigger delay; value clipped to upper limit

Example: The trigger delay was set to a value out of

range. The trigger delay has been adjusted to the

maximum (655350 nseconds).

-222 Data out of range; trigger delay limited by length of burst; value

clipped to upper limit

Example: The trigger delay and the burst cycle time

combined must be less than the burst period.

-222 Data out of range;duty cycle; value clipped to ...

Example: The duty cycle is limited depending on the

frequency.

Duty Cycle

Frequency

50%

> 25MHz

10%~90%

100 KHz ~ 1MHz

1%~99%

< 100KHz

-222 Data out of range; duty cycle limited by frequency; value clipped to

upper limit

Example: The duty cycle is limited depending on the

frequency. When the frequency is greater than 50

MHz, the duty cycle is automatically limited to 50%.

1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 300 301

Pas de commentaire

Gw-instek AFG-2225 User Manual Manuel d'utilisateur Page 283