Gw-instek LCR-800 Series Manuel d'utilisateur télécharger pdf (Page 22)

BASIC MEASUREMENT

Running Measurement

Select Single measurement

Background

Measurements can be manually controlled

(MANU) or automatically updated (AUTO).

In manual mode, one measurement is performed

by pressing the start key.

Panel operation

1. Press the START key to manually

perform a measurement when in

manual mode.

TESTING will appear on the screen, followed by

the measurement results. The duration of the test

will depend on the measurement accuracy and the

number of averages used.

LCR-800 User Manual

Select Automatic measurement

Background

Measurement can be manually controlled (MANU)

or automatically updated (AUTO).

In continuous mode (AUTO), measurements are

automatically done and the display is updated

according to the measurement speed setting.

Panel operation

1. Hold the START key for a few

seconds to toggle between automatic

(AUTO) and manual (MANU)

mode.

2. When in AUTO mode,

measurements will start

automatically until AUTO mode is

switched back to MANU.

The bottom of the screen will indicate if AUTO or

MANU mode is activated.

Testing will appear on the screen each time a

measurement is completed.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Pas de commentaire

Gw-instek LCR-800 Series Manuel d'utilisateur Page 22